kali

Setup simple wardrive device with Raspberry PI + Kali Linux

by

/etc/hostapd/hostapd.conf interface=wlan0 country_code=ID ssid=KALIPI hw_mode=g channel=13 macaddr_acl=0 ignore_broadcast_ssid=0 auth_algs=1 ieee80211n=1 wme_enabled=1 # The following is for adding a PW wpa=2 wpa_passphrase=difficultpassword wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP /etc/dnsmasq.conf interface=wlan0 dhcp-range=192.168.1.2,192.168.1.10,24h dhcp-option=option:dns-server,192.168.1.1 Enable and restart services systemctl enable hostapd systemctl enable dnsmasq systemctl restart hostapd systemctl restart dnsmasq References : https://unix.stackexchange.com/questions/699968/hostapd-disables-and-enables-interface

Update Kali on Raspberry

by

1. Check the repo source as expected kali@kali:~$ cat /etc/apt/sources.list # See https://www.kali.org/docs/general-use/kali-linux-sources-list-repositories/ deb http://http.kali.org/kali kali-rolling main contrib non-free non-free-firmware # Additional line for source packages # deb-src http://http.kali.org/kali kali-rolling main contrib non-free non-free-firmware kali@kali:~$ 2. Start the kali upgrade kali@kali:~$ sudo apt update kali@kali:~$ kali@kali:~$ sudo apt full-upgrade -y kali@kali:~$ Reference : https://www.kali.org/docs/general-use/updating-kali/